• Account
  • Search
  • Language
Mobile nav
SUPPORT

Reboot Cycle After Flashing to SD Card


Reboot Cycle After Flashing to SD Card

 

If you're encountering reboot cycle after flashing BSP to SD card, we strongly recommend flashing the BSP to SSD. Here is the flashing guide.

 

Pre-requisites

  • X86 host running Ubuntu 18.04 or 20.04 LTS

  • NVMe or USB flash device (AVerMedia Box PCs have SSD included)

 

Preparing BSP Package

  1. Open the folder where you have downloaded the BSP tarball. You may get the BSP files from the Downloads section of the AVerMedia product page, or by contacting AVerMedia Support.
  2. Open a terminal window of the download location.
  3. Open the provided Release Notes. The Release Notes contain the basic BSP installation steps.
 

 

Setting Configurations

  1. Install the external device to the host PC and check the external device's sector number where it installed
  2. Modify the value of "num_sectors" (from step A) in the configuration file
  3. (Optional) Setup MIPI CSI camera (sudo ./setup.sh)
  4. Connect the AI Box PC to the host PC via the Micro USB port using a Micro USB to USB cable.
  5. Put the AI Box PC into recovery mode. (Power off the device --> Press and hold the recovery  button --> Power on the device --> Release the recovery button)

 

Flash the BSP using:

  1. Default user account (nvidia/nvidia): ./install.sh
  2. Custom user account as default: ./install.sh --create_default_account

Language